SATA - USB 2.0 (3 kábel) - SATA / PATA / IDE USB 2.0 adapter átalakító kábelhez 2,5 / 3,5 hüvelykes merevlemezhez

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
SATA/PATA/IDE To USB 2.0 Adapter Converter Cable For 2.5/3.5 Inch Hard Drive
SATA to USB 2.0 (5 Cables)Description:
A must have tool kit for data transfer, backup and cloning
Turn any SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface
Hi-Speed USB interface provides for easy installation with its plug and play design
Light weight, lowest cost mobile storage solution
Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive
Connect your SATA / IDE device to your computer through a USB port
Compliant with USB 1.1 and 2.0 standards
USB 2.0 interface for 480 Mbps high speed data transfer
Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices
Plug-and-play
AC power can be used world widely with input voltage AC 100v - 240v / 50 - 60Hz
Supports Windows ME/2000/XP/Mac OS 8.6 or Latest version
Plug Type: US
Net weight: 225g
Package weight: 229gPackage Included:
1PC*USB to IDE / SATA cable adapter
1PC*SATA Data cable
1PC*AC adapter
1PC*AC to IDE power converter
1PC*IDE to SATA power cable
SATA to USB 2.0 (3 Cables)
Features:The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interfaceUSB2.0 TO IDE/SATA high-speed connectionUSB2.0 high speed transmission, stable performanceSupport CR cd-rom, DVD, cd-rom, CD - RW, DVD RWSupport system: Windows 2000, me, XP, Vista and Mac OSUnder Windows 2000 / ME/XP/Vista, don't need The drive
* the solidification structure, stable performance* USB transfer IDE/SATA conversion line* conversion head integration 2.5 inch, 3.5 inch and 5.25 inch, type hard disk (below 320 g), cd-rom (The recorder)* support hot plug, plug and play* can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof* good compatibility, can realize data exchange across the hardware platform* transfer rate quickly, the transfer rate of up to 480 MB/s
Specifications:USB Cable Length: 62cm/24.41in.4 Pin power cable Length: 17.5cm/6.89in.SATA cable Length: 36cm/14.17in.
Using Information:1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.(there is no power cord and other accessories)2. the connection order(1) first connect the power cord line to 220v mains.(2) connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).(3) connect the USB cable to your PC, and power on the hard disk box, can exchange data after the computer identify USB device a few minutes later.C. hard disk box removalRemove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.Notice:The power adapter belongs to High heating equipment, please pay attention to keep good heat dissipation. Please remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
Package Included:1 x USB 2.0 to IDE SATA Adaptor Cable1 x 4 Pin power cable1 x SATA cable
202109218668/2 - ali110 (281)