1X (Kerékpár-hajtókar eltávolító csavarkulcs szerszám fogantyú eltávolítása Kerékpárjavító szerszámok M9C8)

1X(Bicycle crank remover remove wrench tool handle Bicycle repair tools M9C8)

1X(Name: Remove shaft/crank handle removal tool
Material: Carbon steel (quenched, harder)
Color: Silver & Black & Red
Size: about 79 x 21 x 21 mm (axis)
Length: 133mm, width 28mm, thickness about 3mm (crank handle)
Application: Removal of shafts and cranks
Features
1. The bicycle sprocket wheel is disassembled, the length of the top bar is longer, the square mouth and splined sprocket wheel and crank can be disassembled, and a wrench is provided, which is more practical and convenient.
2. Easy to operate and use
3. Compact size makes it necessary for outdoor riding
Instructions:
Steps to remove the crank
1. First, use a 8mm hex to loosen the sprocket fixing screw, then screw the thick part of the sprocket remover into the crank, tighten with a wrench, and manually tighten the fine end of the sprocket remover clockwise. , After using a wrench to tighten a few, the top of the sprocket
2. Black headgear screwed into the crank, remember, this headgear to screw in the end, do not have not screwed to the end, with a white top rod to the top. Otherwise, it will be easy to pull the aluminum into a crank tooth pattern.
3. The mounting plate and crank need not be disassembled, and the fixing screws can be tightened directly. It is necessary to pay attention to the position of the following left and right cranks. Do not mount them as a straight edge.
Old-fashioned crankshaft hex screws can be used square crank removal tool silver section, hex socket disassembly!
Package Included:
1 crank puller removal tool
1 crank handle
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

283472736968 - bestbuy (258)