DIY Kit Perfect 8x8 hangjelző kék FFT hangfrekvenciás hangvezérlés LED

DIY Kit Perfect 8x8 Audio Indicator Blue FFT Voice Frequency Voice Control LED
Descriptions:1. Introduce.
1>. Working voltage: 5V.
2>. PCB size: 75*45mm.
3>. There are four fixed mounting holes on PCB.
4>. It is no need for filter circuit. It can driver dot matrix, spectrum indicating and so on.
5>. We have programmed the code to FFT2088.It can supply 8*8 LED.
6>. It design for audio equipment. Being used in all kinds of audio output device widely.
7>. Professional audio decoding. It can display equency and amplitude for audio signal.
8>. There are three display mode can be selected(Fast flash, Slow flash 1,Slow flash 2).Provide the feeling of cool.
9>. There are three Sensitivity mode can be selected(High,Medium,Low).To adapt to the different power supply environment.
10>. Audio automatic gain control. Always show the best visual effect.
11>. Circuit design is simple. Add current limiting resistor drive LEDs directly.
2. Function declaration.
Function Menu selection by a button. It has three different operations as following:
1>. Test Mode.
Press button before power on, then power on, IC will enter into test mode automatically. In this mode, it can test led and circuit.
2>. Change Display Mode. ( press the button less than 1.5 seconds)It will change a display mode by short press one time button(less than 1.5 seconds).
1). S1 Mode: slow flash 1. It will display ?S1? on LED screen. In this mode, It's the slowest display and update.
2). S2 Mode: slow flash 2. It will display ?S2? on LED screen. In this mode, Its speed is appropriate.
3). F Mode: fast flash. It will display ?F? on LED screen. In this mode, It's the fastest display and update.
3>. Sensitivity Mode. ( press the button more than 1.5 seconds)
It will change signal detection sensitivity by long press one time button(more than 1.5 seconds).
1). L Mode: low sensitivity mode. It will display ?L? on LED screen. In this mode, It can filter weak jamming signal, It is not sensitive to the interference of power supply.
2). M Mode: medium sensitivity mode. It will display ?M? on LED screen. In this mode, It can filter the weaker jamming signal, Signal detection sensitivity.
3). H Mode: high sensitivity mode. It will display ?H? on LED screen. In this mode, It can filter the weaker jamming signal, It is sensitive to the interference of power supply.

3. Component listing.Component Number Parameter Quantity
Resistance R1-R6,R10,R11 33ohm 9
Resistance R9 10ohm 1
Resistance R7,R8 330k ohm 2
Resistance R12,R13 1K ohm 2
Capacitance SMD C2,C4,C8,C9 10uf 106 4
Capacitance SMD C1,C3,C5-C7 0.1uf 104 5
IC FFT2088 U1 SOP-20 1
Blue LED 0805 64
Button E1 2-Pin 1
Audio socket J1,J2 3.5mm SMD 2
DC power socket DC 3.5mm SMD 1
PCB 1
Package:1PCS * DIY Kit Perfect 8x8 Audio Indicator Blue FFT Voice Freque
401106359420 - ali110 (281)