A DSO150 oszcilloszkóp komplett P6020 BNC G5S8 szondával

DSO150 Oscilloscope full assembled with P6020 BNC standard probe G5S8

Adopts ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen
Used for secondary development on the basis of this kit, for example, it can be changed to millivoltmeter, data loggers. Come with instructions, easy to install and operate
Auto/normal/single trigger modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous waveform before trigger (negative delay). Can freeze waveform display at any time (HOLD function)
Waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: Will not lose the waveform after powering off
Short-circuit and open-circuit detection: Can help the user find out the soldering error. TFT controller recognition function. The SMD has been soldered, more suitable for electronic beginners
Digital Channels: 1
Record Length: as the description
Display Size: 2.9 Inches & Under
DIY Supplies: Electrical
Model Number: DSO150
Real Time Sampling Rate: as the description
Band Width: as the description
Display resolution: as the description
Specifications:
Maximum real-time sampling rate: 1 MSa/s
Analog bandwidth: 0 - 200 KHz
Sensitivity range: 5 - 20 mV/div
Maximum input voltage: 50 Vpk (1X probe)
Input impedance: 1M ohms/20pF
Accuracy: 12 bits
Record length: 1024 points
Coupling modes: DC / AC / GND
Time Base Range: 500s/Div - 10us / Div
Trigger modes: Auto, normal, and single
Trigger position: Center of buffer
Supply voltage: DC 9 V (8 - 10 V)
Current consumption: ~120 mA @ 9 V
colour: white
Material: ABS electronic components
size: Product size: 10.2*7.3*2.1cm
Main board size: 94 x 65 mm (3.7 x 2.56 in)
Analog board size: 65

283481344292 - bestbuy (263)